- Posts: 38
- Thank you received: 8
Water Damage from Flood MMS Protocol
- BoomerSooner17
-
Topic Author
- Offline
- Junior Member
-
Less
More
11 Feb 2026 10:03 #87922
by BoomerSooner17
Water Damage from Flood MMS Protocol was created by BoomerSooner17
I have been searching for the protocol for MMS for water damage. We had our aerobic septic clog and back up into our home. Had the system repaired and then a company came to our home, sent by our insurance, to see if we got water in the walls, etc. We did and it's not horrible. They want to use this product Medicean Blue label and reading the ingredients its all chemicals and horrible stuff, despite them saying its "safe". We have been using MMS for 3 years all the time and it's cured so many diseases and issues and now my husband's diabetes blood sugars are FINALLY done to the normal range. He came off all meds 3 years ago after learning what the ingredients were in his meds and refuses to take them. So, he began MMS and all his other health issues have gone away as well.
Needing guidance to what protocol Jim Humble would have used to get rid of any potential microbes, mole spores, etc. that might be potentially develop in our walls. This company opened up the wall in one area by our shower (where they said they detected water) and then removed the floor molding around our toilet. We have a dehumidifier in the bathroom along with some fans blowing on the areas to dry it out. Again, it's not horrible more of a precaution than anything but if we address this quickly we can stop this from turning into a health disaster. I know we have done the 50 drops of activated MMS on our bodies and works very well. I'm wondering if we sprayed that on those areas that got wet to kill anything that potentially could develop. This happened on Saturday (February 7th) and they removed the wet wall area yesterday (February 10th), it was only about a 10" wide and they went up the wall about 2' cause behind that wall (drywall) was some 2x4's. The baseboards around the toilet have been removed and they checked inside the wall with their meter, and they are saying not much water and they are telling us it did not get the drywall (cause its was not touching the floor area but maybe ½" above the floor, just the baseboards got affected. If I spray MMS in those areas then allow it to dry out, I'm thinking that would kill those potential mold spores, microbes, what ever grows from water damage??? Appreciate any guidance you can offer. You have always been so kind and helpful and Christ like. God Bless you.....
Needing guidance to what protocol Jim Humble would have used to get rid of any potential microbes, mole spores, etc. that might be potentially develop in our walls. This company opened up the wall in one area by our shower (where they said they detected water) and then removed the floor molding around our toilet. We have a dehumidifier in the bathroom along with some fans blowing on the areas to dry it out. Again, it's not horrible more of a precaution than anything but if we address this quickly we can stop this from turning into a health disaster. I know we have done the 50 drops of activated MMS on our bodies and works very well. I'm wondering if we sprayed that on those areas that got wet to kill anything that potentially could develop. This happened on Saturday (February 7th) and they removed the wet wall area yesterday (February 10th), it was only about a 10" wide and they went up the wall about 2' cause behind that wall (drywall) was some 2x4's. The baseboards around the toilet have been removed and they checked inside the wall with their meter, and they are saying not much water and they are telling us it did not get the drywall (cause its was not touching the floor area but maybe ½" above the floor, just the baseboards got affected. If I spray MMS in those areas then allow it to dry out, I'm thinking that would kill those potential mold spores, microbes, what ever grows from water damage??? Appreciate any guidance you can offer. You have always been so kind and helpful and Christ like. God Bless you.....
Please Log in or Create an account to join the conversation.
- CLO2
-
- Offline
- Administrator
-
11 Feb 2026 13:13 - 11 Feb 2026 13:18 #87923
by CLO2
Consider using CDH or CDS which contain 3000+ppm CLO2 compared to 25ppm with a 3 drop MMS1 dose. You could spray either of those two CLO2 solutions. CDH is very simple to make. Watch the video at this link . You can scale up the recipe to make a larger quantity of CDH.
Replied by CLO2 on topic Water Damage from Flood MMS Protocol
The problem when using MMS1 outside stomach acid is that it only contains 10% of available chlorine dioxide (CLO2) that is released from sodium chlorite solution at 30 seconds of activation time. MMS1 is primarily used for ingestion. It needs stomach acid to produce much more CLO2.I have been searching for the protocol for MMS for water damage. We had our aerobic septic clog and back up into our home. Had the system repaired and then a company came to our home, sent by our insurance, to see if we got water in the walls, etc. We did and it's not horrible. They want to use this product Medicean Blue label and reading the ingredients its all chemicals and horrible stuff, despite them saying its "safe". We have been using MMS for 3 years all the time and it's cured so many diseases and issues and now my husband's diabetes blood sugars are FINALLY done to the normal range. He came off all meds 3 years ago after learning what the ingredients were in his meds and refuses to take them. So, he began MMS and all his other health issues have gone away as well.
Needing guidance to what protocol Jim Humble would have used to get rid of any potential microbes, mole spores, etc. that might be potentially develop in our walls. This company opened up the wall in one area by our shower (where they said they detected water) and then removed the floor molding around our toilet. We have a dehumidifier in the bathroom along with some fans blowing on the areas to dry it out. Again, it's not horrible more of a precaution than anything but if we address this quickly we can stop this from turning into a health disaster. I know we have done the 50 drops of activated MMS on our bodies and works very well. I'm wondering if we sprayed that on those areas that got wet to kill anything that potentially could develop. This happened on Saturday (February 7th) and they removed the wet wall area yesterday (February 10th), it was only about a 10" wide and they went up the wall about 2' cause behind that wall (drywall) was some 2x4's. The baseboards around the toilet have been removed and they checked inside the wall with their meter, and they are saying not much water and they are telling us it did not get the drywall (cause its was not touching the floor area but maybe ½" above the floor, just the baseboards got affected. If I spray MMS in those areas then allow it to dry out, I'm thinking that would kill those potential mold spores, microbes, what ever grows from water damage??? Appreciate any guidance you can offer. You have always been so kind and helpful and Christ like. God Bless you.....
Consider using CDH or CDS which contain 3000+ppm CLO2 compared to 25ppm with a 3 drop MMS1 dose. You could spray either of those two CLO2 solutions. CDH is very simple to make. Watch the video at this link . You can scale up the recipe to make a larger quantity of CDH.
Last edit: 11 Feb 2026 13:18 by CLO2.
The following user(s) said Thank You: BoomerSooner17
Please Log in or Create an account to join the conversation.
- BoomerSooner17
-
Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 38
- Thank you received: 8
13 Feb 2026 03:31 - 13 Feb 2026 03:34 #87927
by BoomerSooner17
Replied by BoomerSooner17 on topic Water Damage from Flood MMS Protocol
Thank you so much. I totally understand and appreciate you so much for your guidance and help. I happen to have some CDS, which I bought a few months ago as a backup, not knowing when I might need it. How would I use the CDS that I have? I purchased it from one of the companies that Jim Humble recommended.
Plus the video is easy to understand and how to make it. Pray that God will bless you.....
Plus the video is easy to understand and how to make it. Pray that God will bless you.....
Last edit: 13 Feb 2026 03:34 by BoomerSooner17.
Please Log in or Create an account to join the conversation.
- CLO2
-
- Offline
- Administrator
-
13 Feb 2026 06:03 #87928
by CLO2
Replied by CLO2 on topic Water Damage from Flood MMS Protocol
Thank you so much. I totally understand and appreciate you so much for your guidance and help. I happen to have some CDS, which I bought a few months ago as a backup, not knowing when I might need it.
How would I use the CDS that I have? I purchased it from one of the companies that Jim Humble recommended. For spraying CDS to kill mold, you should use it full strength.
Plus the video is easy to understand and how to make it. Pray that God will bless you..... Thank you!
The following user(s) said Thank You: BoomerSooner17
Please Log in or Create an account to join the conversation.
- BoomerSooner17
-
Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 38
- Thank you received: 8
13 Feb 2026 23:04 #87935
by BoomerSooner17
Replied by BoomerSooner17 on topic Water Damage from Flood MMS Protocol
Thank you so much. You have us thinking. We heard others talking about if you wanted to use MMS1 on vegetables when you bring them home from the grocery store they help detox, clean off chemicals, etc. They said to use 8 activated drops in a bowl of water and soak the vegetables. Would CDS be better for that based on what you said about it not being consumed? And if so, home much CDS would you use in a bowl of water to soak you vegetables and fruit?
You have taught us a lot and we share and help others and always refer them back to you. God truly blesses us with each other.
You have taught us a lot and we share and help others and always refer them back to you. God truly blesses us with each other.
Please Log in or Create an account to join the conversation.
Time to create page: 0.412 seconds